On this page
The formula
- Each stream = (video bitrate + audio bitrate) × (1 + protocol overhead)
- Sustained upload = each stream × number of streams leaving the venue
- Upload to order = sustained upload × headroom
- Data per hour (GB) = sustained upload in Mb/s × 3,600 ÷ 8 ÷ 1,000
The preset bitrates are typical H.264 encoding values for video platforms. Each platform publishes its recommended range, and it changes over time, so check the platform page before the event. Protocol overhead covers headers and retransmissions: RTMP sits near 5%; SRT with packet recovery can need 25% or more, depending on the latency you set.
Why 2× headroom
A connection upload varies through the day and drops when more people use the same network, which is exactly what happens at a full event. The encoder works at a near constant bitrate; if the link drops below it for a few seconds, the buffer empties and the stream stalls. Ordering twice the sustained upload is a common rule of thumb. On shared internet or a cellular network, three times is safer.
One stream or several
Sending the same signal to YouTube, Facebook and your own player from the venue multiplies the upload. A cloud distribution service takes in one stream and replicates it to the destinations, which cuts the venue upload to that of one signal.
In professional contribution, the signal can travel by bonded cellular backpack (mochilink), fiber or satellite to a point with a better network.
Test the link at the venue, at the same time of day as the event, with the encoder sending at the real bitrate for at least 30 minutes. A speed test on a phone does not show stability. The live broadcast checklist lists the rest of the tests.
To size the encoder, links and redundancy in one go, i9TV streaming and encoding integration designs the whole chain.
On the day, i9 Studios live broadcast runs the cameras, the cut and the outgoing signal.
i9 does this every day: production, broadcast, engineering and equipment, with one team accountable from start to finish.