0 Talk to i9
  1. Home
  2. Learn
  3. Guides
  4. How to plan a live event broadcast
9 min readGuide · Live

How to plan a live event broadcast

A live broadcast succeeds weeks before it goes on air. This guide walks the full path, from the first call to the last frame, the way broadcast crews work.

Key takeaways
  • Start with where the signal goes and who watches, not with the camera.
  • The site survey decides power, camera positions and the internet path.
  • Always have two outbound paths for the signal, over different routes.
  • Rehearse with the real signal, to the real destination, before the day.
  • Every point that can fail needs a written backup plan and an owner.
On this page

To live stream an event at a professional level, you define the goal and the signal destination, survey the venue, design the camera and audio plan, secure two outbound paths over the internet or a link, build a crew with clear roles, rehearse with the real signal and run the day with a backup plan for every critical point. It sounds like a lot, and it is. But each step has a logical order, and teams that follow it are rarely surprised on air.

This guide works for talks, concerts, church services, auctions, launches, conferences and sports. The size changes, the logic does not. If you would rather hire the service than build it yourself, see how a live broadcast company works.

The ten steps

  1. 01
    Set the goal and destinationWho watches, where (YouTube, your own site, the venue screen, a partner broadcaster) and for how long. That sets the format, the resolution and whether you record for later.
  2. 02
    Survey the venuePower, camera positions, acoustics, light, network, truck or load-in access, setup times.
  3. 03
    Design the camera planHow many cameras, where they sit, which lens, who operates and what each one shows.
  4. 04
    Plan the audioMicrophones per source, the console, stage monitoring and a separate mix for the broadcast.
  5. 05
    Secure the outbound signalDedicated internet, a second path through another carrier or bonded cellular, the encoder and the protocol.
  6. 06
    Prepare graphics and contentOpens and stingers, name supers, holding slates and a contingency slate.
  7. 07
    Build the crewDirector, technical director, camera operators, audio, engineering, graphics and an on-site producer.
  8. 08
    Set up internal commsIntercom between the director, cameras and stage, with a channel reserved for engineering.
  9. 09
    Rehearse with the real signalStream to a private destination ahead of time and check picture, audio, latency and stability.
  10. 10
    Run the show and log itOn air, follow the rundown, record everything redundantly and note what happened for the report.

First: goal, audience and signal destination

The first question is not which camera to use. It is who will watch and where. A stream to public YouTube has different requirements from a feed delivered to a broadcaster, which sets its own format, audio standard and delivery path. A hybrid event, with an audience on site and online, needs pictures for the venue screen and for the internet at the same time, often with different cuts.

Also decide what happens afterward. If the content will become social clips or an edited program, you need to record the isolated cameras, not just the program cut. That decision changes the number of recorders and the storage, and the recording storage calculator helps you size the drives.

The site survey

No plan survives without a site survey. Go to the venue with the director and the engineer, ideally at the same time of day as the event, to see the real light. Bring the floor plan, take photos and write down measurements.

  • Power: how many circuits are available, how far they are from the production position and whether there is a generator or UPS.
  • Cameras: where they can sit without blocking the audience, how far they are from the stage and whether there is a high point for a wide shot.
  • Network: real upload speed measured on site, whether the line is dedicated or shared and who is responsible for it on the day.
  • Audio: where the house console is, whether it can give you a feed for the broadcast and how that signal reaches production.
  • Logistics: truck or load-in access, elevators, setup and strike times, equipment security.

Cameras, audio and graphics

A stage event with one speaker works with three cameras: a locked wide shot, a close shot on the speaker and a camera for the audience or reactions. Concerts, auctions and sports need more. The event camera planner suggests a starting point by event type, and the site survey adjusts it.

Audio kills more broadcasts than picture does. Viewers forgive a shaky camera, but they leave the stream when they cannot understand the speech. Ask the house console for a dedicated broadcast mix, or bring your own console. Wireless lavalier and handheld microphones need clear frequencies at the venue, checked in advance.

Graphics make it look professional: speaker name and title, logo, open and break slates. Also prepare a contingency slate in case something drops, and holding music. All of this goes into the live broadcast checklist.

The rule of thumb is a stable upload speed of at least twice your video bitrate. A 1080p stream usually runs between 6 and 10 Mbps; 4K runs much higher. Use the streaming bandwidth calculator to get the number for your case.

Always have two paths: a dedicated wired line and a second one through another carrier, or a transmitter that bonds several cellular networks, such as a bonded cellular backpack (mochilink). At venues with no infrastructure, satellite or digital radio links solve it. To carry the signal over the internet reliably, protocols such as SRT recover lost packets and are the standard among professionals.

In practice

Never trust the venue Wi-Fi for the main outbound feed. It is shared with the audience and it fails exactly when the room fills up.

Crew and roles

On a mid-size broadcast, each person has one job. Doubling up roles is the shortest path to a mistake on air.

  • Director: decides what goes to air and talks to everyone over intercom.
  • Technical director: punches the cuts on the switcher, on the director's call.
  • Camera operators: one per operated camera; robotic cameras can share one operator across several.
  • Audio engineer: runs the broadcast mix, separate from the house sound.
  • Engineer: owns the signal, encoder, internet and redundancy.
  • Graphics operator and on-site producer: names, slates and the link to the event organizers.

These people talk over intercom, with separate channels for direction, cameras and engineering. The guide to intercom for live production explains how to set up that system.

Rehearsal and event day

Run a full technical rehearsal ahead of time, streaming to a private destination. Check latency, audio and video sync, audio levels, legibility of the supers and stability for at least an hour. On the day, arrive early enough to set up, test and still have some slack before opening the stream on a holding slate.

During the event, record redundantly: the program cut on two recorders and, if the content will become other formats, each isolated camera. One operator watches the final destination, viewing the stream the way the audience does, to catch latency, quality drops or audio problems.

A backup plan for every critical point

  • Internet drops: the encoder fails over to the second path automatically.
  • Power fluctuates: UPS on the signal equipment and a generator when the venue cannot guarantee power.
  • A camera fails: the director knows which shot replaces each camera.
  • A microphone fails: a spare is ready and tested on the console.
  • The destination fails: a second platform or a backup link is already configured.

When to hire a live broadcast company

The bigger the audience, the camera count or the cost of a failure, the more sense it makes to hire people who do this every day. A specialist company arrives with tested equipment, a crew used to working together and engineering that answers for the signal. To see what drives the price, read what goes into a broadcast budget.

i9 Studios runs multicamera broadcasts and recordings with the 4K OB truck, with up to 16 broadcast or cinema cameras, and with flypacks for venues the truck cannot reach.

At the Galácticos auction, the show used 16 cameras with individual, redundant recording and playout to the event screen. At ACBJJ 19, the operation had an OB truck, 6 cameras, a crane and an international live broadcast distributed to several countries.

If you have an event coming up, send the date, the venue and the signal destination, and ask for a broadcast plan with cameras, crew and outbound paths. Before that, the bandwidth and camera tools help you get to the numbers.

Want help with this?

i9 does this every day: production, broadcast, engineering and equipment, with one team accountable from start to finish.

Frequently asked questions.

How many cameras do I need to stream an event?

For a talk, three cameras cover it well: wide shot, close shot and audience. Concerts, auctions and sports need six to sixteen, depending on the space and what has to be seen.

What internet do I need for a 1080p stream?

A stable upload of at least 15 to 20 Mbps dedicated to the broadcast, with a second path through another carrier or bonded cellular. Measure the speed at the venue, at the time of the event.

How far ahead should I plan?

For mid-size events, three to four weeks, with a site survey and a rehearsal. Large events or feeds for broadcasters need more time, because they involve links, credentials and tests with the destination.

Can I stream to several platforms at once?

Yes. The encoder sends the signal to a distribution service or to each platform directly. Check whether your upload bandwidth can carry every destination or whether distribution happens in the cloud.

What if the stream drops in the middle of the event?

Have the second path set to take over automatically, a contingency slate ready and the local recording running. That way viewers lose seconds, and the full content stays saved.