0 Talk to i9
  1. Home
  2. Learn
  3. Guides
  4. Intercom for live production: how to set up…
7 min readGuide · Live

Intercom for live production: how to set up crew communications

On a live show, whoever cannot hear the director misses the cut. Intercom is the nervous system of the production, and it has to be as reliable as the video signal.

Key takeaways
  • Intercom is real-time, always-on communication between every role.
  • Separate channels keep engineering from talking over the director.
  • Wireless systems free the crew, but need frequency planning.
  • IP intercom links the studio, the truck and remote sites on one network.
  • Always have a backup path for the director's communications.
On this page

In TV production and live events, intercom is the voice communication system that links the director, camera operators, audio, engineering, stage and production in real time, with nothing to dial or press to listen. To set one up, you list who needs to talk to whom, split those conversations into channels, choose between wired, wireless or IP, size the panels and beltpacks and test everything in rehearsal, with a backup for the director's communications.

The intercom page shows what i9TV delivers in permanent systems. This guide helps you understand and size the system for a production.

How intercom works

Each person wears a headset with a microphone connected to a beltpack (a unit clipped to the belt) or a desk panel. Beltpacks and panels connect to a central frame, which splits conversations into channels. The director talks to everyone at once or to a group; operators reply when they need to. Unlike an ordinary radio, professional intercom is full duplex: everyone talks and listens at the same time, like a phone call.

Channels: who talks to whom

Organizing by channel is what keeps the production in order. A typical live broadcast setup separates:

  • Direction: director, technical director and cameras. It is the most important channel.
  • Production: producer, stage, assistants and whoever calls entrances and guests.
  • Engineering: engineer, signal and video technicians, without getting in the director's way.
  • Audio: the broadcast audio engineer and the house sound engineer.
  • IFB: the earpiece feed for anchors and reporters, with program audio and the director's voice.

Wired, wireless or IP

Two-wire or four-wire systems are simple and very stable, ideal for fixed positions such as cameras on tripods and control desks. Wireless systems free handheld camera operators, Steadicam, stage and production, but need frequency planning, especially at large events with a lot of radio equipment in the same space.

IP intercom carries the channels over the data network, which lets you link the studio, the OB truck and even a team in another city on the same system. In SMPTE ST 2110 facilities, intercom audio can travel on the same network as the video, using the AES67 standard.

How to size it

  1. 01
    List the rolesCount every person who needs to listen or talk: direction, cameras, audio, engineering, stage, production, graphics.
  2. 02
    Define the channelsGroup the roles and decide who talks on each channel and who only listens.
  3. 03
    Separate fixed and mobileFixed positions use panels or wired beltpacks; people who move use wireless.
  4. 04
    Plan coverage and frequenciesFor wireless, check range, walls and other radio equipment at the venue.
  5. 05
    Include IFB and sparesTalent earpieces, extra beltpacks, batteries and spare headsets.
  6. 06
    Test in rehearsalCall each position by name and confirm everyone hears and is heard.
In practice

Label each beltpack and headset with the role, not the person's name. When someone changes position mid-production, communications stay right.

Intercom and tally

Intercom usually goes together with tally, the light that tells an operator their camera is on air. Many systems show tally on the beltpack or the camera itself, and some link tally to intercom channels, so the director talks straight to the camera that is on air. On cameras with a CCU, intercom and tally already travel over the camera fiber.

Common mistakes

  • One channel for everyone, where engineering and production talk over the director.
  • Wireless beltpack batteries with no charged spares for a long event.
  • Frequencies not checked at the venue, with interference from other systems.
  • Anchors without IFB, relying on hand signals.
  • No backup path for the director's voice.

Before going on air

Run a full intercom check in rehearsal and repeat it half an hour before air. The director calls each position by role, and each person answers. Also check that the anchors' IFB carries program audio, that the volume is comfortable and that the director's voice comes in on top without cutting the audio. Add this test to the live broadcast checklist, along with cameras, audio and signal.

  • Every position answers on the right channel.
  • Batteries charged and spares set aside per position.
  • Headsets with ear pads and cables in good condition.
  • IFB tested with each anchor and reporter.
  • A radio or phone as the director's backup path.

Intercom in churches and corporate events

Churches that stream and corporate events usually have smaller teams, often volunteers. Here, a simple wireless system with two or three channels works: one for direction and cameras, another for stage and production. What matters is that the person cutting cameras and the person calling stage cues talk over the same system, not by text messages. In churches with live service streaming, intercom links the broadcast room, the sound console and the stage.

Permanent intercom in studios and stations

In studios and stations, intercom is permanent and has to reach the control room, the studio, master control, remotes and sometimes other cities. Here it becomes part of the engineering design together with the control room, the network and audio. The channel plan follows the station's routine, with intercom matrices that change routes without repatching cables.

Intercom with i9

On live productions, i9 Studios brings intercom with the 4K OB truck or the flypack, already integrated with the cameras and direction. The rental catalogue also includes full duplex wireless intercom for productions that only need communications. For studios and stations, i9TV designs and installs intercom as part of the system. Tell us the crew size and the type of production, and get an intercom proposal for your project.

Want help with this?

i9 does this every day: production, broadcast, engineering and equipment, with one team accountable from start to finish.

Frequently asked questions.

What is the difference between intercom and a two-way radio?

Professional intercom is full duplex and always on: everyone talks and listens at the same time, on organized channels. Ordinary radios need a button press to talk and only one person speaks at a time.

What is IFB?

It is the earpiece feed for the anchor or reporter. It carries program audio and, when the director speaks, the director's voice on top, to give cues without the audience hearing.

How many intercom channels do I need?

A mid-size broadcast usually uses three to five channels: direction, production, engineering, audio and IFB. Large productions have more.

Is wireless intercom reliable?

It is, when frequencies are planned and there are spare batteries. For fixed positions, wired intercom is still the simplest and most stable.

Can intercom link different cities?

Yes, with IP intercom. The channels travel over the network, which lets you link the studio, the remote and off-site teams on one system.