0 Talk to i9
  1. Home
  2. Learn
  3. Guides
  4. Multicamera systems with CCU and fiber
7 min readGuide · Engineering

Multicamera systems with CCU and fiber

When eight or sixteen cameras have to look like one, the picture cannot depend on each operator. The CCU puts picture control in one person's hands, and fiber carries everything over a single cable.

Key takeaways
  • The CCU controls each camera's picture from the production position.
  • A single fiber cable carries video, audio, intercom, tally, return and power.
  • The shader matches every camera live.
  • It is the standard in TV studios, OB trucks and large events.
  • Cinema cameras can also work in live multicamera systems.
On this page

A multicamera system with CCU and fiber is the setup used in TV and large live events where each camera connects, over a hybrid fiber cable, to a camera control unit (CCU) at the production position. That cable carries the camera's video, brings back program return, intercom, tally and power, and lets a shader adjust iris, color and exposure on every camera remotely. The result is a set of cameras with matching pictures, without relying on each operator to set their own.

The multicamera systems page shows what i9TV delivers in this system. This guide explains each piece.

What the CCU does

The CCU (camera control unit) sits in the control room or the truck, one per camera. It receives the camera signal over fiber and delivers video in the production format to the switcher. In the other direction, it sends program return, sync, tally and intercom to the camera. Each CCU connects to a remote control panel, the RCP, where the shader adjusts the camera.

The hybrid fiber cable

The cable between camera and CCU combines optical fibers, which carry the signals, and copper conductors, which carry power to the camera. So the camera needs no battery or local power supply. Distances from hundreds of meters to a few kilometers are possible, depending on the system. In stadiums, arenas and large stages, that allows camera positions far from the truck with no loss of quality.

  • Camera video to the CCU, in HD or 4K.
  • Program return to the operator's viewfinder or monitor.
  • Intercom between the director and the camera operator.
  • Tally, the light that shows the camera is on air.
  • Sync (genlock), so all cameras work in phase.
  • Power for the camera, with no battery.

The shader

In a multicamera production, camera operators handle framing and focus. Exposure and color belong to the shader, also called the video operator, who watches every camera on a reference monitor and matches them live. When the stage lighting changes, the shader corrects every camera at once. Without that, each cut on the switcher would show a different color. It is a role that takes experience, which is why it usually comes with the production's technical crews.

Studio, handheld and cinema cameras

A multicamera system uses studio cameras, with long-zoom broadcast lenses mounted on pedestals, and shoulder-mounted portable cameras for stage and audience. Cinema cameras can also join live systems, with fiber adapters and remote control, for those who want the cinematic look with TV operation. The choice between a broadcast lens and a cinema lens changes the look and the way you operate.

Where CCU multicamera systems are used

  • TV studios, with pedestal cameras and CCUs in the control room.
  • OB trucks, for concerts, sports and shows outside the studio.
  • Large events and church services, with cameras far from production.
  • Studio audience shows and reality shows with many cameras at once.

Alternatives and when to use each one

For smaller productions, cameras with SDI or NDI output, without a CCU, connected straight to the switcher, cut costs. Robotic PTZ cameras go where an operator does not fit. The CCU and fiber system pays off when there are many cameras, long distances, a need for matching pictures and long live operations. Many productions combine all three: CCU cameras in the main positions, PTZ at fixed points and wireless cameras for stage and audience.

4K, HDR and what changes in shading

In 4K and HDR productions, shading matters even more. The shader works with reference monitors that can show the wider dynamic range and has to make sure the HDR signal and the conventional HD version, when both go out at once, are both right. Current systems let you produce in 4K and HDR and also deliver in HD, with conversions done inside the camera and CCU chain. That is why the final format has to be decided before choosing the cameras, not after.

In practice

Plan the fiber routes during the site survey. Hybrid cables are tough, but the connectors need cleaning and protection. A forgotten dust cap can cost you a camera on air.

How to plan

  1. 01
    Set the camera countBy the shots the director needs and the size of the space.
  2. 02
    Choose cameras and lensesStudio, shoulder or cinema, with lenses suited to the distances.
  3. 03
    Plan the fiber routesDistances, crossings, cable protection and spare connectors.
  4. 04
    Build the shading positionCCUs, remote panels, reference monitor and a shader.
  5. 05
    Integrate intercom and tallyChannels per camera and tally linked to the switcher.
  6. 06
    Test and matchAdjust every camera under the real lighting before going on air.

Multicamera with i9

The i9 Studios 4K OB truck works with up to 16 broadcast or cinema cameras, combining the practicality of broadcast with the look of cinema.

On Canta Comigo, there were 16 broadcast cameras.

On The Cut Brasil, an HBO Max reality show, there were 9 Sony F55 cinema cameras.

For permanent studios, i9TV designs and installs multicamera systems with CCU, fiber, shading and integration with the switcher and intercom. Tell us how many cameras and where they sit, and get a multicamera system proposal for your studio or production.

Want help with this?

i9 does this every day: production, broadcast, engineering and equipment, with one team accountable from start to finish.

Frequently asked questions.

What is a CCU on a broadcast camera?

It is the camera control unit, which sits at the production position and connects to the camera over fiber. It delivers video to the switcher and lets you control the picture remotely.

Why use fiber on cameras?

Because a single cable carries video, return, intercom, tally and power over long distances, with no loss of quality.

What does the shader do?

Adjusts iris, color and exposure on every camera live, so the picture matches on every cut.

Do cinema cameras work in live multicamera?

Yes, with adapters and remote control. That gives you the cinema look with TV operation, as in reality shows and music programs.

How many cameras does the i9 OB truck support?

The i9 Studios 4K OB truck works with up to 16 broadcast or cinema cameras.