0 Talk to i9
  1. Home
  2. i9TV
  3. Integration by system
  4. Multicamera systems with CCUs and fiber

Multicamera systems with CCUs and fiber

Broadcast cameras with CCUs make every camera look the same and keep them controlled from one room. i9TV designs and integrates the system in studios and mobile productions.

i9TV · System

Many cameras, one skin tone on the cut.

What it is.

In a broadcast multicamera system, each camera connects to a CCU, the camera control unit, through a hybrid fiber cable that carries power, video, return, intercom and tally. In the technical room, a video operator adjusts iris, color and level on every camera from the remote control panel, the RCP, so the cut between them does not show.

That is how studio audience shows, concerts and sports get made at TV quality. Canta Comigo was recorded with 16 broadcast cameras in the i9 OB truck; the Galácticos auctions also had 16 cameras, each recorded individually and redundantly.

What i9TV delivers.

01Complete camera chainCamera, lens, CCU, RCP and fiber cable specified together, with spares.
02SyncReference generator and genlock so every camera and source cuts without a jump.
03Fiber infrastructureHybrid cables, connection panels in the studio and on stage, and backup paths.
04Picture controlA video operator position with RCPs, reference monitors and waveform, tied into monitoring.
05Switcher and intercom integrationTally, program return and intercom reaching each camera operator through the camera cable itself.

The parts of the system.

The components of a typical system. The design decides which ones go into yours.

01Broadcast camerasStudio or shoulder bodies with broadcast standard sensors.
02Broadcast lensesLong zooms, with servo focus and zoom controlled by the camera operator.
03CCUControl unit that receives the camera signal and powers the camera head.
04RCPRemote panel to adjust iris, color and level on each camera.
05Hybrid fiber cableCarries power, signals and communication over hundreds of meters.
06Sync generatorGives every camera its timing reference.
07Reference monitorsShow color and exposure accurately to the video operator.

How it works.

01Site surveyProduction format, camera count, distances, lenses and where the technical room sits.
02DesignCamera chains, fiber routes, sync, tally, intercom and the picture control position.
03InstallationCable runs, connection panels, CCU installation and configuration.
04Camera matchingColor and level matched across all cameras with a chart and under the real lighting.
05Recording or airOn hand for the first recordings or broadcasts.

Frequently asked questions.

What is a CCU?

It is the camera control unit. It powers the camera head through the cable, receives the video and sends back return, tally and intercom. The guide multicamera systems with CCUs and fiber explains the chain.

Why use fiber instead of coaxial cable?

Fiber carries the signal hundreds of meters without loss and, in a hybrid cable, combines power and communication in one run. In stadiums, auditoriums and large stages, that decides the setup.

How many cameras can a system like this handle?

As many as the production calls for and the technical room can hold. The i9 4K OB truck works with up to 16 broadcast or cinema cameras.

Can cinema cameras join a multicamera system?

Yes, with adaptations for control and return. The Cut, Caldeirão and Al Jazeera were shot with nine Sony F55 cinema cameras in the OB truck.

Which camera and lens brands show up in these systems?

Sony and Panasonic cameras and Fujinon and Canon lenses are common in broadcast systems. The choice follows the production format.

Talk to engineering.

Tell us the date, the place and what you need. The right team replies with one proposal.

+55 11 3392-7878 · contato@i9tv.com.br