0 Talk to i9
  1. Home
  2. i9TV
  3. Integration by system
  4. Streaming and encoding for broadcasters…

Streaming and encoding for broadcasters, churches and events

The encoder turns the station's signal into something that travels over the internet. i9TV designs the whole chain, from encoder to platform, with a backup path.

i9TV · System

The same show has to reach TV, the website, YouTube and phones at the same time.

What it is.

An encoder compresses video and audio so they fit through an internet connection. For contribution, it carries the signal from one point to another, such as from a field location to the station, using protocols like SRT. For distribution, it delivers the channel to platforms, which pass it on to viewers over HLS.

Streaming looks simple until it drops in the middle of the service or the newscast. Bandwidth, protocol, compression profile and backup decide whether the signal arrives. At Freedom Air TV, i9TV set up visual radio over streaming; at Assembleia de Deus Belém, video streaming to the internet.

What i9TV delivers.

01Contribution chainEncoders and decoders using SRT or other protocols to bring in field feeds and exchange signals between sites.
02Distribution to platformsSimultaneous outputs to the website, YouTube, social media and pay TV operators, with defined quality profiles.
03Bandwidth calculationBitrate per output and internet link sized to match, with the bandwidth calculator as a reference.
04RedundancyTwo encoders, two internet links from different carriers and automatic failover when one drops.
05Stream monitoringTracking of the signal going out and what arrives at the platform, with alarms, as in station monitoring.

The parts of the system.

The components of a typical system. The design decides which ones go into yours.

01Hardware encodersCompress the SDI or IP signal to H.264 or HEVC.
02DecodersReceive the compressed signal and output SDI or IP at the other end.
03SRT gatewaysReceive and redistribute streams with packet loss recovery.
04Internet linksPrimary and backup connections from different carriers.
05Platforms and CDNDeliver video to viewers at scale.
06MonitoringChecks the quality of what goes out and what arrives.

How it works.

01Site surveyWhere the signal originates, where it needs to go, how many outputs and what internet is available on site.
02DesignProtocols, compression profiles, encoders, links and backup path.
03Installation and setupEncoders, network, platform accounts and full tests from source to platform.
04Duration testTest streams running the real length of the show to check stability and delay.
05On airOn hand for the first broadcasts, with fine tuning.

Frequently asked questions.

SRT or NDI?

SRT was built to cross the internet with controlled loss and delay. NDI was built for local networks with low latency. The SRT vs NDI comparison explains when to use each.

What internet speed do I need to stream live?

Add up the bitrate of every output and leave headroom. One HD output usually needs a few megabits per second; more outputs and higher quality need more. Test the link at the actual time of the broadcast.

Hardware or software encoder?

Software handles events and smaller operations. Dedicated hardware is the choice when the stream cannot drop and runs 24 hours a day. The guide professional streaming compares the options.

Do you stream services and events live?

i9 Studios runs live broadcasts of events and shows. For organizations that want to stream with their own crew, i9TV builds the permanent system.

What is HLS?

It is the format most platforms use to deliver video to viewers, in short chunks and at several quality levels. More in HLS.

Talk to engineering.

Tell us the date, the place and what you need. The right team replies with one proposal.

+55 11 3392-7878 · contato@i9tv.com.br