0 Talk to i9
  1. Home
  2. i9TV
  3. Integration by system
  4. Satellite uplink and downlink for broadcasters

Satellite uplink and downlink for broadcasters

Satellite is still the path that reaches many places at once. i9TV integrates satellite receive and send into the station's system.

i9TV · System

A signal goes up once and comes down at thousands of dishes.

What it is.

In satellite transmission, the uplink sends the station's signal to a satellite, which returns it over a huge area. On the receive side, dishes and integrated receiver decoders, or IRDs, bring that signal into the master control of affiliates, repeater stations and pay TV operators.

For networks with affiliates, for shows coming from other countries and for regions without fiber, satellite is still a direct path. At Freedom Air TV in South Africa, i9TV integrated satellite transmission with two switchers and master control.

What i9TV delivers.

01Signal receptionDishes, LNBs, IRDs and distribution of received signals to the router and master control.
02Signal uplinkEncoders, modulators and integration with the uplink provider and the contracted capacity.
03Band selectionC or Ku band depending on coverage, regional rainfall and local interference, including 5G near the C band.
04Master control integrationSatellite feeds treated as one more source, with monitoring and backup.
05Link monitoringSignal level, errors and alarms tracked in the monitoring system.

The parts of the system.

The components of a typical system. The design decides which ones go into yours.

01Satellite dishReceives from or sends to the satellite.
02LNB and filtersConvert and clean the received signal, including against interference.
03IRDReceiver that decodes the satellite signal to SDI or IP.
04Encoder and modulatorPrepare the signal for uplink.
05High power amplifierGives the uplink signal the power it needs.
06DistributionTakes received signals to the router and master control.

How it works.

01Site surveySignals to receive or send, satellites, coverage area and dish location.
02DesignDish, band, uplink or downlink equipment, cables, interference protection and integration with the station.
03InstallationBase, dish, pointing, cabling and receiver and encoder setup.
04Testing and going on airSignal measurements, tests with the provider and support for the first broadcasts.

Frequently asked questions.

How does satellite transmission work?

The signal goes up from the uplink station to the satellite and comes down to every dish in the coverage area. The guide satellite transmission explains it step by step.

What is an IRD?

It is the integrated receiver decoder: it receives the satellite signal, decodes it and outputs video and audio. More in IRD.

C band or Ku band?

C band suffers little from rain and covers large areas, but needs bigger dishes. Ku band uses smaller dishes and is more sensitive to heavy rain. The choice depends on the region and the contracted service.

Does 5G interfere with C band reception?

It can, because it operates on neighboring frequencies. The right filters on the LNB solve most cases.

Satellite or internet to carry the signal?

Internet with SRT costs less for point to point contribution. Satellite wins when the same signal must reach many sites at once or where there is no good connection.

Talk to engineering.

Tell us the date, the place and what you need. The right team replies with one proposal.

+55 11 3392-7878 · contato@i9tv.com.br