0 Talk to i9
  1. Home
  2. i9TV
  3. Integration by system
  4. TV master control: design, integration and…

TV master control: design, integration and operation

Master control is the last room before air. i9TV designs, integrates and commissions master control rooms for broadcasters and hands over a tested room, with the crew trained to run it.

i9TV · System

Everything a station produces passes through one room before it reaches the viewer.

What it is.

Master control, or MCR, receives everything that goes to air: live shows from the studios, recorded content from playout, field links, satellite and network feeds. There the operator switches sources at the right moment, inserts the logo, closed captions and commercial breaks, and delivers a single signal to the transmitter, the pay TV operators and streaming.

When master control fails, the station goes off air. So the design starts with redundancy, sync and monitoring, and only then moves on to panels and screens. At Record Manaus, i9TV delivered master control together with the switcher, studio and a Ross router, with an i9 operations crew inside the station.

What i9TV delivers.

01Signal flow designA diagram of every input and output, from studio to transmitter, with backup paths defined before anything is bought.
02Real redundancyDual power supplies, main and backup paths, emergency switching and a plan for when a device stops.
03Playout and automation integrationSchedule, breaks, logos and graphics fired by automation, with the operator in charge of the exceptions.
04Monitoring and alarmsA multiviewer with every source, audio and loudness meters, and signal loss alarms. Details in monitoring and QC.
05Commissioning and trainingEvery path tested with the station's engineers present, and operators trained on the system they will run.
06Operation and support after airA resident crew or managed services, depending on what the station needs.

The parts of the system.

The components of a typical system. The design decides which ones go into yours.

01Master control switcherSwitches between program, breaks and backup sources with clean transitions.
02Playout serverPlays shows, commercials and promos in schedule order.
03Automation systemRuns the schedule and logs what went to air.
04Logo and graphics insertionPuts the channel bug, lower thirds and notices over the signal.
05Routing switcherBrings any source in the station to master control.
06Sync generatorKeeps every device on the same timing, with reference and genlock.
07Multiviewer and metersShows every source and measures video, audio and loudness.
08Output encodersDeliver the signal to the transmitter, the pay TV operators and streaming.

How it works.

01Site surveyTechnical visit, inventory of what is already there, input sources, output destinations and schedule requirements.
02DesignSignal flow, equipment list, room layout, power, cooling and cabling, approved with the station's engineers.
03Supply and installationEquipment specified and delivered, racks built, cables labeled and documented.
04CommissioningEvery path, backup and alarm tested, with failures simulated before going to air.
05On air and supportCutover with the i9TV crew on hand, operator training and support as agreed in the contract.

Frequently asked questions.

Does master control need special furniture?

It needs desks and racks built for 24-hour operation, with access for maintenance. i9TV designs custom technical desks together with the system.

What is a TV master control room?

It is the technical room where the station's programming is assembled and sent to air. It takes in studios, playout, links and satellite and outputs a single signal for transmission. The master control glossary entry has the short definition.

What is the difference between master control and a control room?

The control room produces a show: it cuts cameras, mixes audio, adds graphics. Master control receives that show and all the others and decides what goes to air at each moment.

What does a master control operator do?

Follows the schedule, switches sources, inserts breaks, reacts to failures and logs what went to air. The guide what a master control operator does covers the routine.

Can master control be replaced without taking the station off air?

Usually, yes. The new system is built and tested in parallel, and the cutover happens in an agreed window, with the old system ready to come back if needed.

Does master control need to change for TV 3.0?

Brazil's next generation of broadcast TV will require master control to deliver new formats and handle interactivity. Planning for it now avoids buying twice. See TV 3.0 for broadcasters.

Who is my contact during the project?

You deal with one person, from the site survey to air. Phone and WhatsApp: +55 11 3392-7878.

Talk to engineering.

Tell us the date, the place and what you need. The right team replies with one proposal.

+55 11 3392-7878 · contato@i9tv.com.br