0 Talk to i9
  1. Home
  2. i9TV
  3. Broadcast engineering, design and commissioning

Broadcast engineering, design and commissioning

Before the first piece of equipment, someone has to draw how the signal will travel. i9TV does the design, supervises the build and only hands over after testing every path.

i9TV · Service

The design is the cheap part of a TV station. Getting it wrong is the expensive part.

The service.

Broadcast engineering turns a need (a daily newscast, a new channel, one more studio) into signal flow, equipment list, rack drawings, cabling, power, cooling and a timeline. Commissioning closes the work: everything installed is tested against what was designed.

At Freedom Air TV, in South Africa, i9TV did the full engineering and integration design for a station with three interconnected studios, two switchers, master control and satellite transmission, plus a 360° newsroom. That is the kind of responsibility that sits with engineering.

What i9TV delivers.

01Signal flow and diagramsThe path of every video, audio, sync (genlock) and control signal, documented for the people who will run and maintain it.
02Equipment listSpecified by function, with manufacturer alternatives and what can be reused from what you already own.
03Equipment roomRacks, power, grounding, cooling and the cable and fiber routes through the building.
04SDI, IP or hybridChosen by operation and budget, not by fashion. See SDI or IP.
05CommissioningTests of every path, redundancy, power loss and source changeover, with a written report.
06Handover documentationUpdated diagrams, the configuration of each device and a point list for the team that stays.

How it works.

01Site surveyTechnical visit, a conversation with the operations team and an inventory of what exists.
02Concept designSignal flow and equipment list with an estimate, so you can decide the scope. The guide what it costs to build a TV station shows what drives the number.
03Detailed designFloor plans, racks, cabling, power and the installation schedule.
04Build supervisioni9TV engineering on site during installation and integration.
05Commissioning and handoverTests, fixes, training and final documentation.

How to hire us.

01Design, supply and installationi9TV answers for the design and the build until the signal is on air.
02Expansion designA new studio, a new control room or a router replacement inside a station that stays on air.

Frequently asked questions.

What is commissioning in broadcast?

It is the test phase after installation. Every signal, every device and every redundancy is checked against the design before the system goes on air. Without commissioning, the errors show up live.

How long does an engineering project take?

It depends on size: one studio is very different from a whole station. The timeline comes out of the concept design, after the site survey.

Is it worth starting in IP with SMPTE 2110?

It depends on scale, budget and who will maintain it. In large new facilities, IP usually makes sense; in a small studio, SDI stays simple and cheap. See IP infrastructure and SMPTE ST 2110.

Does the design include the equipment room and power?

Yes. Racks, power, grounding and cooling are part of the design, because they are what takes a station off air when they fail.

Does i9TV design stations outside Brazil?

Yes. Record Américas, in Miami, and Freedom Air TV, in South Africa, are among the published projects.

Talk to engineering.

Tell us the date, the place and what you need. The right team replies with one proposal.

+55 11 3392-7878 · contato@i9tv.com.br