0 Talk to i9
  1. Home
  2. Learn
  3. Guides
  4. How much it costs to build a TV station
7 min readGuide · Costs

How much it costs to build a TV station

The cost of a TV station depends on three choices: how the signal reaches the audience, how much content you produce and how much redundancy you need. This guide shows what goes into the budget and how to estimate it before you ask for proposals.

Key takeaways
  • There is no single price: it depends on the type of station, the coverage area and the schedule.
  • The budget splits into five blocks: regulation, transmission, production, playout and operations.
  • In over-the-air TV, the transmitter, antenna and tower form a block that internet channels do not have.
  • Running the station for years costs as much as building it.
  • Ask for proposals system by system, with everything out of scope in writing.
On this page

Short answer

There is no single price for building a TV station. The range goes from a channel with one small studio that streams online to a free-to-air broadcaster with a transmitter, a tower, several studios and a redundant master control. The cost is the sum of five blocks: regulation and spectrum, transmission, production, playout and operations. If you estimate each block separately, you get a number you can trust. If you ask for the price of a TV station with no scope, you get estimates that cannot be compared.

First, decide what kind of station you are building

The same word, station, covers very different projects. Before any spreadsheet, decide which of these models fits your project, because each one has its own cost blocks.

  • Free-to-air originating station (a geradora, in Brazilian terms): holds its own license, originates programming and broadcasts over the air. It is the most expensive project, because it adds up transmitter, antenna system, studios and playout.
  • Affiliate or repeater with local production: takes the network feed and inserts local windows, such as news and commercials. Studio and master control can be smaller.
  • Pay TV or internet channel: needs no transmitter and no broadcast license, but needs playout, encoding and distribution contracts.
  • Corporate, church or radio-with-video channel: a lean setup, often one studio with robotic cameras and streaming.

If the goal is free-to-air TV, the licensing process comes first and has its own timeline. The guide how to open a free-to-air TV channel in Brazil explains the steps. Here the focus is on what it costs to build and run the facility.

Regulation and spectrum

In Brazilian free-to-air TV, the broadcast license (outorga) comes from the Ministry of Communications and the station license comes from Anatel, the federal telecom regulator. This line covers the technical design signed by a licensed engineer, station licensing, the Fistel inspection fees that every licensed transmitter pays and the legal fees for the process. For an internet or pay TV channel this line almost disappears, but contracts with operators, platforms and distributors take its place.

This block only exists in free-to-air TV, and it is one of the heaviest. It includes the transmitter, whose power depends on the coverage area and the channel class; the antenna system, with antenna, transmission line and filters; your own tower or rented space on someone else's tower; and the studio-to-transmitter link, over fiber or microwave. A backup transmitter and a duplicate link add a lot to this block, but they keep the channel on air when something fails.

Production: studio, cameras and control room

The TV studio brings together cameras, lenses, pedestals, lighting, set design or LED wall, microphones, talkback and teleprompter. The control room brings together switcher, multiviewer, graphics, audio console and intercom. The size of this block follows the schedule: a daily live newscast needs more cameras, more redundancy and more people than recorded shows.

One rule of thumb keeps you honest: each extra camera does not cost only the camera. It brings a lens, a support, a cable or fiber run, a switcher input, an intercom station, tally and a person to operate it, or a robotic camera system to control it remotely.

Playout: master control, automation and infrastructure

Master control is the last point before air. It takes in the studio, network and links, plays out the schedule, inserts commercials, closed captions and audio description, measures loudness and records what went to air. The playout and automation system lives here, and it grows with the number of channels and live hours.

Under everything sits the infrastructure nobody sees and every budget needs: the equipment room, racks, conditioned power, UPS, generator, cooling, cabling and the routing matrix that distributes signals. The choice between SDI and IP also belongs here, because it changes cables, network switches and the kind of team that will maintain the system.

Operations: the cost that continues after launch

A station on air spends money every month. Master control needs shifts that cover the whole schedule. There is engineering and maintenance, power for the transmitter and the equipment room, tower and link rental, software licenses, manufacturer support contracts, annual fees and, of course, content. Add these up for three to five years and compare the total with the initial investment: in many projects, operations cost as much as the build. Hiring managed services is one way to turn part of that cost into a predictable monthly figure.

What changes the price most

  • Coverage and power: more cities and more population served call for larger transmitters or repeaters.
  • Number of studios and cameras: each studio carries lighting, set, audio and a control room.
  • Live or recorded: live needs redundancy and a full-time crew.
  • Redundancy: duplicating master control, playout and links is expensive and keeps you from going off air.
  • SDI or IP: the decision changes cabling, network and team training.
  • Readiness for TV 3.0, Brazil's next-generation broadcast standard: buying with it in mind avoids replacing equipment too early.
  • Schedule: imported equipment has lead times, and projects with a fixed launch date pay for speed.

How to estimate your project in five steps

  1. 01
    Write the scheduleList how many live hours per day, how many shows, whether there will be local news and how many commercial breaks. The schedule sizes the studio, master control and crew.
  2. 02
    Define coverageFree-to-air, pay TV or internet, and in which cities. The answer decides whether the transmission block exists and how big it is.
  3. 03
    Draw the signal pathFrom camera to audience, every point becomes a budget line: acquisition, control, routing, playout, transmission and distribution.
  4. 04
    Separate capital and operating costsBuild two columns: what you buy once and what you pay every month. Project operations for at least three years.
  5. 05
    Ask for proposals by systemCompare equal scopes. A cheap proposal that leaves out power, cooling or the tower is not cheaper.
In practice

Ask every proposal to list what is out of scope. Civil works, power, cooling, the tower and software licenses are often left out and show up later as extra cost.

Buy, rent or hire as a service

Not everything has to be bought on day one. Cameras and event equipment can be rented while the schedule grows. Maintenance can be contracted. The whole operation can sit with an outside crew under a resident technical operations model, which cuts hiring and training at the start. The point is to design the full system from the beginning, even if you build it in stages.

Where i9 comes in

i9TV does engineering, integration and commissioning for TV stations, from the studio to master control. At Record Manaus, the project included a Ross matrix, PTZ cameras, master control and field crews with live links. At Record Belém, the delivery covered switcher, master control and studios.

If you are at the start, the page building a TV station shows how we run the whole project, from site survey to the first day on air, with i9 Studios on production and i9Store supplying equipment.

Want help with this?

i9 does this every day: production, broadcast, engineering and equipment, with one team accountable from start to finish.

Frequently asked questions.

Can I build a small station on a small budget?

Yes, if the channel is internet-based, corporate or pay TV. A studio with robotic cameras, a switcher, playout and streaming covers a lean schedule. Free-to-air TV has fixed costs for licensing, transmission and round-the-clock operation that do not shrink in the same proportion.

What costs more: the studio or transmission?

It depends on the project. In free-to-air TV, the transmitter, antenna system and tower form a large block that grows with coverage. In stations with several studios and a lot of live production, the production block can exceed transmission.

How long does it take to build a TV station?

The technical build depends on scope, import lead times and works in the equipment room. In Brazilian free-to-air TV, the licensing process has its own timeline and is usually the longest step. Plan both tracks in parallel.

Do I need to think about TV 3.0 now?

Yes, when you buy. Encoders, transmitters and infrastructure that can be upgraded to the new generation keep you from replacing equipment a few years later. The current signal stays on air during the transition.

Is used equipment worth buying?

It can be for simple items. For master control, playout and the transmitter, check whether the manufacturer still supports and updates the software. Equipment without support is a risk of going off air.

Does i9 handle the whole project?

Yes. i9TV handles engineering, design, integration and commissioning. i9 Studios comes in when you need production and crews. i9Store supplies the equipment. You deal with one person throughout the project.