0 Talk to i9
  1. Home
  2. Blog
  3. TV 3.0: the rollout timeline for broadcasters
7 min readBlog · Engineering i9 Team · October 26, 2026

TV 3.0: the rollout timeline for broadcasters

TV 3.0 has had a decree since August 2025 and started in the largest state capitals. The timeline for each market is up to the Ministry of Communications; what a broadcaster can do now is prepare its signal chain.

Key takeaways
  • Decree 12.595 of August 27, 2025, made TV 3.0 official with the ATSC 3.0 physical layer.
  • The decree sets no dates: the Ministry of Communications defines transition rules and timelines.
  • The rollout starts in the largest state capitals; the first operations in São Paulo and Rio came with the 2026 World Cup.
  • The current signal is switched off only where TV 3.0 already has effective coverage.
  • Each broadcaster appears as an app, with an icon in the catalog, ordered by channel number.
On this page

The short answer

TV 3.0, known to viewers as DTV+, was made official by Decree 12.595 of August 27, 2025. The decree contains no dates: it gives the Ministry of Communications the job of setting transition rules and timelines. The rollout starts in the largest state capitals, and the first operations in São Paulo and Rio de Janeiro coincided with the June 2026 World Cup. The current digital signal stays on air until TV 3.0 has effective coverage in each area.

If you need the technical explanation of the system, start with the guide what is TV 3.0. This post sticks to the calendar and what it asks of a broadcaster.

The timeline so far

  1. 01
    SBTVD Forum testsThe Brazilian Digital TV System Forum ran lab and field tests on the candidate technologies for each layer of the new system.
  2. 02
    July 2024: physical layerThe Forum board recommended the ATSC 3.0 physical layer to the Ministry of Communications, with MIMO, LDM and transmitter identification (TxID).
  3. 03
    August 27, 2025: decreeDecree 12.595 chose the standard for the second generation of the system, called TV 3.0, and set general rules for its rollout in Brazil. It came out six days after SET EXPO 2025, where the topic dominated the agenda.
  4. 04
    June 2026: first operationsGlobo launched DTV+ in São Paulo and Rio with the World Cup, on a trial basis and with interactive features.
  5. 05
    Next stepsMore capitals and cities, further rules from the Ministry and Anatel and, only after effective coverage, the switch-off of the current signal in each area.
In practice

City-by-city dates come out in acts from the Ministry of Communications and Anatel, the telecom regulator, not in the decree. For your market, follow the ordinances and talk to whoever designs your transmission before you buy equipment.

What the decree defines

  • ATSC 3.0 physical layer, with MIMO, LDM and TxID to identify the transmitter (Art. 3).
  • Fixed, mobile and portable reception, integration between over-the-air and internet, and geographic targeting (Art. 5).
  • Each broadcaster transmits an app and has an icon in the catalog, ordered by its current channel number (Art. 7).
  • Channels are assigned gradually, at the broadcaster's request, when technically feasible (Art. 14).
  • The Ministry of Communications may set transition rules and timelines (Art. 15).
  • Receivers get current digital TV and TV 3.0 at the same time until the transition ends (Art. 16).
  • No viewer may lose access to free-to-air TV; switch-off depends on TV 3.0 coverage in each area (Art. 23).

What changes inside the station

TV 3.0 is more than a new transmitter. The signal goes out on a different physical layer, with new video and audio codecs defined in the Forum specifications. That calls for compatible encoders at the station output.

The broadcaster also becomes an app. Programming, data, interactivity and targeted advertising come out of the same operation. Playout and automation have to talk to that app layer.

To carry 4K, immersive audio and several outputs at once, many broadcasters use the migration to move the broadcast center to IP. The basis for that change is IP infrastructure and SMPTE ST 2110.

The studio counts too. If the goal is to sell a better picture, acquisition has to keep up, with cameras and monitoring that work in 4K and HDR.

A five-step plan

  1. 01
    InventoryList everything from studio to transmitter and mark what is SDI, what is IP and what is near end of life.
  2. 02
    Channel and transmissionConfirm your TV 3.0 channel status with Anatel and the Ministry, and design the antenna system.
  3. 03
    Signal chainDefine encoders, multiplexing, playout and the network that ties it together, in phases that fit the budget.
  4. 04
    App and dataDecide what the station app will offer and who produces that content day to day.
  5. 05
    Commissioning and crewTest the system end to end and train the operators before going on air.

Where i9TV comes in

i9TV handles TV 3.0 upgrades for broadcasters: it surveys the current chain, designs the migration, integrates the systems and commissions through to air.

The same team does engineering, design and commissioning of broadcast centers, and can stay on to run operations after the switch.

If you run engineering at a TV station, see everything i9 does for TV stations and talk to us before you sign off on a transmitter purchase.

Want help with this?

i9 does this every day: production, broadcast, engineering and equipment, with one team accountable from start to finish.

Frequently asked questions.

When does TV 3.0 start in my city?

The decree sets no dates. The Ministry of Communications defines the transition timeline, starting with the largest state capitals. For your market, follow the ordinances from the Ministry and Anatel.

Will current digital TV be switched off?

Only after TV 3.0 is in place. The decree says no viewer may lose access to free-to-air TV and that switch-off in each area depends on effective TV 3.0 coverage.

Do I need internet to receive TV 3.0?

No. The signal comes over the air. The internet unlocks the interactive features and apps.

What is DTV+?

It is the name TV 3.0 goes by with viewers. Technically, it is the second generation of the Brazilian Digital Terrestrial TV System.

How does a broadcaster get its TV 3.0 channel?

Under the decree, the Ministry assigns the channel gradually, at the broadcaster's request and when technically feasible, after review by Anatel.

What does i9TV do in a TV 3.0 migration?

It surveys the current signal chain, does the engineering design, integrates encoders, playout and transmission, and commissions the system through to air.