0 Talk to i9
  1. Home
  2. Learn
  3. Guides
  4. How to turn a radio station into video radio
7 min readGuide · Broadcasters

How to turn a radio station into video radio

Listeners now watch too. Turning a radio studio into a video studio does not mean becoming a TV station, but it does mean thinking about camera, light and set without disrupting what already works on air.

Key takeaways
  • Radio audio stays in charge: the video adapts to it.
  • Fixed robotic cameras and automatic switching keep the crew small.
  • Lighting and set have to work with the studio in use all day.
  • Video goes out by streaming, without touching the radio transmitter.
  • Start with the highest-rated shows and expand later.
On this page

To turn a radio station into video radio, you install cameras in the studio, usually fixed robotic ones, create a set and lighting that work on camera, connect the cameras to a switcher that can cut automatically based on the open microphone, use the station's own console audio as the video soundtrack and stream the result to YouTube, social media, the website and the app. The radio transmitter stays the same; video is a new distribution channel.

If you are building or modernizing the whole station, see the for radio stations page, with equipment and what i9 delivers for radio broadcasters.

Why radio stations are moving to video

Much of the radio audience now listens on phones and video platforms. Talk, sports and comedy shows become clips that travel on social media and bring in new listeners. Major Brazilian radio stations already stream their strongest shows with video. For a regional station, video opens room for sponsorship with a logo on screen and for content that lives beyond the on-air hour.

What changes in the studio

  • Cameras: two to four, covering hosts, guests and a wide shot.
  • Lighting: soft LED light that does not heat the studio or tire people who are on air for hours.
  • Set: a backdrop with the station's identity, no glare from glass and no messy cables or equipment on show.
  • Microphones: radio mics appear in the picture, so arms and positions have to be planned for the framing.
  • Acoustics: the same as before, but watch out for fans on new equipment inside the studio.

Robotic cameras and automatic switching

Most radio stations do not have a video operator for every show. So the common answer is robotic PTZ cameras with saved presets and a switcher that cuts automatically to the camera on whoever is speaking, by detecting which microphone is open on the console. When there is an operator, they can refine the cuts, call wide shots and add graphics.

PTZ cameras have the advantage of sitting fixed up high, taking no space on the desk, and responding to remote commands. The comparison between PTZ and operated cameras helps you see when each one makes sense.

Audio: radio stays in charge

The video audio should be the same as the radio audio, taken from the main console or a dedicated output. That guarantees listeners and viewers hear the same thing. The point to watch is sync: video goes through processing and arrives late relative to audio. The system has to compensate for that delay, or the host's lips will not match the voice.

In practice

Do not use the FM transmitter's audio processing on the video stream. It is built for radio and sounds over-compressed on headphones and phones. An output with its own processing for the internet sounds better.

Distribution: streaming and social

Video goes out through an encoder that sends the signal to the platforms, live, while the show is on air. To avoid depending on a single platform, it is common to send to a service that distributes to several at once. Local recording lets you cut the best moments for social media afterward. The professional streaming guide explains encoders and protocols.

The station's internet needs a stable upload for video, separate from what the station already uses for audio and operations. The bandwidth calculator shows how much to reserve for each resolution.

Graphics and sponsorship

With pictures, the station gains new commercial space: a sponsor logo on screen, name supers for guests, phone number and social handles, and promos for the schedule. A simple graphics system, run from the switcher itself or from software, covers most shows.

Video radio, podcast and TV: the differences

All three formats use cameras, microphones and lights, but they need different things. Video radio keeps the live audio schedule as the priority, with discreet cameras and a lean operation. A podcast studio records episodes with a start and an end, and can take more freedom with lighting, set and editing. TV follows strict technical standards for signal, audio and schedule. Many stations use the same studio for video radio and podcasts at different hours, which gets more use out of the investment.

If the station wants to reach TV one day, it pays to design the video radio studio with that in mind: cameras with professional outputs, sync and a signal path that can be taken to a control room in the future.

How to roll it out in stages

  1. 01
    Pick the showsStart with the highest-rated ones or those with the most conversation and guests.
  2. 02
    Visit and measure the studioCamera positions, existing light, reflections, space for equipment.
  3. 03
    Design cameras, lighting and setEach camera's shots, LED lighting and a backdrop with the station's identity.
  4. 04
    Integrate with the radio audioDedicated audio output, sync and open-mic detection for switching.
  5. 05
    Set up distributionEncoder, platforms, recording and the workflow for social clips.
  6. 06
    Train and expandTrain hosts and production, and take the model to other studios.

Video radio in i9 projects

At Freedom Air TV, in South Africa, the i9TV engineering and integration project included a radio station with video streaming, alongside three interconnected studios.

At Assembleia de Deus in Belém and at Igreja Adventista Norte, the communications projects brought radio, podcast and TV together in one facility.

The i9TV engineering and design team designs and installs video radio studios, from robotic cameras to streaming, integrated with the console and the station's routine. Send the studio floor plan and the schedule of the shows you want to put on video, and get a video radio design for your station.

Want help with this?

i9 does this every day: production, broadcast, engineering and equipment, with one team accountable from start to finish.

Frequently asked questions.

Are video radio and visual radio the same thing?

Yes. Both names describe a radio station that also streams pictures from the studio, usually online, while keeping the audio schedule on air.

Do I need a video operator for every show?

Not necessarily. With robotic cameras and automatic switching from the open microphone, many shows run without an operator. Bigger shows benefit from someone refining the cuts.

How many cameras does a radio station need?

Two to four cover most studios: one for each main position and a wide shot.

Does the video interfere with the FM broadcast?

No. The video is distributed by streaming, separate from the transmitter. What changes is the studio, which gains cameras, lighting and a set.

Can we broadcast on TV too?

Yes, if the station has a partner or owned TV channel. In that case, the signal has to follow the TV broadcaster's technical standards.