0 Talk to i9
  1. Home
  2. Tools
  3. Lens field of view calculator
Free tool

Lens field of view calculator

Pick the sensor, the focal length and the distance to the subject. The calculator shows the angle of view, how much of the scene fits in the frame and the right focal length for the shot you want.

Before you take the camera to the venue, you can know whether the lens gets the shot. Field of view depends on two measurements only: sensor width and focal length. Use this to pick lenses from lens rental or to place cameras at an event.

mm
mm
mm
m
m
Horizontal field of view28.0°
Vertical field of view15.9°
Diagonal field of view31.9°
Frame at 5.0 m2.49 m wide × 1.40 m high
Focal length to frame 1.20 m at 5.0 m104 mm
Crop factor (relative to full frame)1.52×
Full frame equivalent focal length76 mm
Approximate result. Confirm with the team before you close the project.
On this page

The formula

For a rectilinear lens focused at infinity, the horizontal field of view is 2 × arctan(sensor width ÷ (2 × focal length)). Swap width for height to get the vertical and for the diagonal to get the diagonal. The frame width at any distance comes from the same similar triangles: frame width = distance × sensor width ÷ focal length.

  • Horizontal angle = 2 · atan(sensor width ÷ (2 · focal length))
  • Frame width = distance × sensor width ÷ focal length
  • Focal length needed = sensor width × distance ÷ desired width
  • Crop factor = full frame diagonal (43.27 mm) ÷ sensor diagonal

Assumptions and limits

The math assumes focus at infinity. Focusing close, the lens extends and the real angle gets a little narrower; lenses with focus breathing change the frame as you focus. Anamorphic lenses squeeze the horizontal axis (2× is the most common factor), so the real horizontal angle is the calculated one times the squeeze factor. The exact sensor size changes with the recording mode: in a cropped 4K mode, use the active area from the camera manual.

Cinema and broadcast sensors

Cinema cameras use Super 35 or full frame sensors with cinema lenses.

The most common mount on those lenses is the PL mount, which takes lenses from several makers.

Studio and field cameras use 2/3-inch sensors with broadcast lenses, which reach long focal lengths with a big zoom range. That is why a news camera gets the speaker face from the back of the auditorium while a cinema camera, at the same focal length, shows much more of the scene.

In practice

To plan camera positions at an event, measure the real distance to the stage and enter the shot width you want: about 1.2 m for a medium shot, 0.6 m for a close-up. On rental cameras, check the sensor size in the recording mode you chose.

In a multicamera system with broadcast lenses, this math decides where each tripod goes.

The camera planner uses the same formula to suggest lenses by position.

Want help with this?

i9 does this every day: production, broadcast, engineering and equipment, with one team accountable from start to finish.

Frequently asked questions.

How do I calculate the field of view of a lens?

Use 2 × arctan(sensor width ÷ (2 × focal length)). A 50 mm lens on Super 35 (24.89 mm wide) has about a 28° horizontal field. On full frame, the same lens has about 40°.

What is crop factor?

It is how much a smaller sensor crops the image compared to full frame, measured by the diagonal. Super 35 has a factor near 1.5; 2/3-inch, near 3.9. Multiply the focal length by the factor to find the full frame equivalent.

What lens do I need for a close-up at 30 meters?

For a close-up about 0.6 m wide at 30 m, on a 2/3-inch sensor, close to 480 mm; on Super 35, close to 1,245 mm. Distances like that call for a long-range broadcast lens, common in event broadcasts.

Does the calculator work for anamorphic lenses?

Yes, with one adjustment: multiply the horizontal angle by the squeeze factor of the lens. A 50 mm 2× anamorphic covers the same horizontal view as a 25 mm spherical lens.

Can I rent the lenses from i9?

Cinema and broadcast lenses are part of the i9 Studios lens rental catalog.