0 Talk to i9
  1. Home
  2. Tools
  3. LED wall pixel pitch calculator
Free tool

LED wall pixel pitch calculator

Enter the wall size, the pitch and the cabinet. The calculator returns the real resolution, how many cabinets fit and the distance at which the audience stops seeing pixels.

Pixel pitch is the distance, in millimeters, from the center of one pixel to the center of the next. It sets how many pixels fit on the wall and how close the wall can be viewed. Run this before you ask for an LED wall and set design proposal, so you start the conversation knowing the resolution the processor will receive.

m
m
mm
m
Cabinets12 × 7 = 84 cabinets
Final wall size6.00 × 3.50 m (21.00 m²)
Pixels per cabinet192 × 192 px
Wall resolution2,304 × 1,344 px (3.10 megapixels)
Video inputLarger than Full HD: needs a 4K UHD input (3,840 × 2,160) or mapping across more than one output
Wall aspect ratio1.71:1
Density147,456 pixels per m²
Minimum viewing distance (rule of thumb: 1 m per mm)2.6 m
Comfortable distance (rule of thumb: 3 m per mm)7.8 m
At the distance you enteredComfortable by the rule of 3 m per mm of pitch
Approximate result. Confirm with the team before you close the project.
On this page

How the calculator gets to the resolution

A wall is built from whole cabinets, so the calculator rounds the size you asked for to the nearest number of cabinets. Then it divides each cabinet side by the pitch: a 500 mm cabinet at 2.6 pitch has about 192 pixels per side. The wall resolution is the number of cabinets times the pixels in each one.

  • Horizontal resolution = cabinets across × (cabinet width in mm ÷ pitch)
  • Vertical resolution = cabinets high × (cabinet height in mm ÷ pitch)
  • Density = pixels per cabinet ÷ cabinet area in m²
  • Catalog pitch is usually rounded (2.6 is 2.604 on many 500 mm cabinets), so the math rounds the pixels per cabinet

Viewing distance: two rules of thumb

No single formula is accepted by every manufacturer. The industry uses two rules of thumb. The minimum distance, in meters, equals the pitch in millimeters: at 2.6 pitch, from 2.6 m back the image stops looking like a grid. The comfortable distance is about three times that, the same as the US rule of 10 feet per millimeter.

For a camera the math changes. In a studio with an LED wall behind the presenter, the risk is moiré: the pixel pattern interferes with the sensor. A finer pitch, focus on the presenter and a shallow depth of field solve most cases.

In XR and virtual production, with the camera close to the wall and tight shots, the pitch is usually much finer than on a concert stage.

What the math leaves out

  • Brightness in nits, needed for outdoor LED or a studio with a lot of light
  • Refresh rate and grayscale, which matter when the wall is on camera
  • Power draw and structure weight, which depend on the cabinet model
  • Processor and cabling: each output port drives a limited number of pixels
In practice

Set the wall resolution before you produce the content. Artwork made at 1,920 × 1,080 for a 2,304 × 1,344 wall will be stretched or end up with borders. The resolution calculator shows how to fit the content.

If you are choosing between LED and a green screen, the LED or chroma key comparison shows when each one pays off.

The guide to LED walls for studios covers pitch choice for each camera distance.

i9TV delivered the Times Brasil · CNBC facility with LED panels in the studio.

Want help with this?

i9 does this every day: production, broadcast, engineering and equipment, with one team accountable from start to finish.

Frequently asked questions.

What pixel pitch should I use in a TV studio?

It depends on the distance between the camera and the wall. As a rule of thumb, the closer the camera and the tighter the shot, the finer the pitch. News studios often use a pitch under 2.6 mm; concert stages, 3.9 mm and up. In a TV studio project, the camera test with the cabinet comes before the purchase.

How do I calculate the resolution of an LED wall?

Divide the wall width and height, in millimeters, by the pixel pitch. A 6,000 × 3,500 mm wall at 2.6 pitch has about 2,300 × 1,350 pixels. Count whole cabinets, because a wall cannot have half a cabinet.

Is the minimum viewing distance a fixed rule?

No. The rules of 1 m and 3 m per millimeter of pitch are industry approximations. Real perception changes with the content, the brightness and each viewer. Use the two as a range, not as an exact limit.

Do I need a 4K processor for my wall?

Only if the resolution goes past 1,920 × 1,080. The calculator shows when the wall fits one Full HD input and when it needs a 4K input or more than one mapped output on the processor.

Can I rent an LED wall from i9?

LED panels are among the i9 Studios rental items. For a permanent install in a studio or church, i9TV engineering handles the project.